Buyhere22, 26 Somers Road, Rugby, CV22 7DH

3mm 5mm LED LEDs RED GREEN BLUE WHITE YELLOW ORANGE RGB UV 1, 25, 50, 100 PACKS!

£2.75 – £9.99

High Quality Leds
IMPORTANT: You should always use a current limiting resisitor when powering an LED, please see my other buyhere22 listing for suitable resistors.


These are 3mm and 5mm LEDs available in the following options, Simply select the one that meets your needs from the Drop Down Selection.

  • Red
  • Green (Olive)
  • Green (Emerald)
  • Blue
  • Yellow
  • Orange
  • White
  • Cold White Diffused
  • Warm white
  • Ultra Violet
  • All single Colour Leds are Standard 2 Pin
  • RGB Common Anode (4pin)
  • RGB Common Cathode (4pin)
  • RGB Slow Flash = Slowly fades between the different colours (2pin)
  • RGB Slow – Fast – Fade = Slowly fades between different colours then quickly flashes between different colours (2pin)
  • Red + Green Dual Colour = This Led Combines Red and Green in a Single LED Common Cathode Not Flashing (3pin)
  • Red + Green Dual Colour = This Led Combines Red and Green in a Single LED Common Anode Not Flashing (3pin)

 Please note that all of our current stock have clear, colourless plastic bodies, except for the Cold White which has a diffused lens

LED Colour Size Forward Voltage max Current Rating max
Red 3mm 2.2V 20mA
5mm 2.2V 20mA
Orange 3mm 2.0V 20mA
5mm 2.6V 20mA
Yellow 3mm 2.4V 20mA
5mm 2.4V 20mA
White 3mm 3.4V 20mA
5mm 3.4V 20mA
Diffused Cold White 3mm 3.4V 20mA
5mm 3.4V 20mA
Warm White 3mm 3.4V 20mA
5mm 3.4V 20mA
Green (olive) 3mm 3.4V 20mA
5mm 3.4V 20mA
Green (Emerald) 3mm 3.4V 20mA
5mm 3.4V 20mA
Blue 3mm 3.4V 20mA
5mm 3.4V 20mA
Ultraviolet 3mm 3.6V 20mA
5mm 3.6V 20mA
Red, Green, Blue (tri-colour, common anode) 4 Pin 3mm Red 2.0V 20mA
Green 3.2V
Blue 3.2V
5mm Red 2.0V 20mA
Green 3.2V
Blue 3.2V
Red, Green, Blue (tri-colour, common cathode) 4 Pin 3mm Red 2.0V 20mA
Green 3.2V
Blue 3.2V
5mm Red 2.0V 20mA
Green 3.2V
Blue 3.2V

Olive Green Led, produces a light green subtle colour output.
Emerald Green Led produces a darker green colour output.

For any led it is important to apply the correct Vf and If to the led to produce the correct colour and brightness light output, otherwise you may see colour output which is not what you may expect. We have taken the measure to test each colour and each batch of leds for correct colour output.
We test the leds by applying  a Vf = 3v and If =20ma to ensure the colour output is within acceptable tolerances.The If with greatly determine the colour output for any led, but remember not to apply too much current !
Ultra-Violet (UV) LEDs will not appear bright due to the UV Wavelength the human eye can not see fully at this wavelength spectrum, this is the characteristic of UV LED

Data Sheets for RGB 2 Pin Slow Flash with timing cycles
Data Sheets for RGB 2 Pin Fast/Slow Flash with timing cycles Data Sheets for RGB 4 Pin Anode
Data Sheets for RGB 4 Pin Cathode
IMPORTANT: You should always use a current limiting resisitor when powering an LED, please see my other buyhere22 listing for suitable resistors.

Did you know, that we test every single LED on your order, not just batch tested. We have a purposes built test machine. Why do we go to all this trouble ? Simple, so you receive fully working LEDs, just see how many we have sold !

Please check out our new PL9823 Programmable LEDs 

Important Note Before you decide to Buy: This item is provided with NO instructions or data sheets. We are unable to provide any technical support, it is therefore essential that you have the resources available to make use of this item and how it operates within the electrical specifications. We check and inspect each order.

Please read and note the following before ordering:
1) My Shipping is for UK Mainland ONLY. No Scotish Highland, Northern Ireland, Isle of Wight or other Isles. Some areas may incur additional costs, if you are unsure please contact me prior to ordering.
2) Please ensure you have a valid contact phone number, I may pass this number onto the Carrier for delivery. No refund for carriage cost will be offered, if delivery is delayed as a result of no valid contact number being provided.
3) I welcome collection for orders,please select collection on checkout otherwise your order will be despatched. Once your order has been picked and tested if applicable. We will then inform you of a date and time for collection. Please bring your payment card for verification when collecting your order. No order will be released without card verification.
4) I am unable to provide ANY technical support, please ensure you fully understand how this item works by checking for any datasheets (not provided with the item), to enable the product to be used within your application / project.
5) VERY IMPORTANT >> Do not make ANY permanent connections. Please test the item BEFORE making any permanent connections e.g. soldering to the item. Please ensure you have the means to test the item WITHOUT applying ANY solder to the item. If an item has any solder applied I will NOT accept any return.
6) When upgrading to 1st class post, (if the option is available), please note this is sent via Royal Mail and is not a guaranteed next day service. If you need a 48hr service please select 48hr delivery at extra cost. This will be sent via Royal Mail or courier. I do not offer a 24hr service. No weekend or public bank holiday deliveries.
7) We attempt to send out all orders received before 10.00am. This excludes weekends and public holidays.
8) Customers placing multiple orders. – I may ship all the orders as one, please do not ask for a refund of shipping cost after you have placed your orders. Please do not place your orders if you want a refund of shipping cost.
9) Some items may have a “Warranty Void if removed” sticker, please DO NOT tamper or remove these stickers. I will not accept any rertuns with tampered or removed sticker. Some buyers have tried to send back items that I have not supplied.

**** Important note **** Some sellers claim the stock is in the UK, please be careful, the seller is often in China and sends the item to a UK agent who then forwards the item on with a UK stamp. Check where the seller is located not just the item location. All my items are physically with me, here in the UK and I offer a quick delivery and communication within the UK.

During busy periods there maybe a delay in delivering your package by Royal Mail. I apologies in adavnce for any inconvenience but would like to point this out before you place your order.