WS2812B 5050 RGB LEDs PLCC 4 Built-In WS2811 IC Addressable Color WS2812 New UK

£2.75£7.35

Clear

WS2812B 5050 RGB LEDs

   


Brand New from UK Stock and UK Seller


Please note that this is the New WS2812B PPLC-4 4 connections version and not the WS2812 PPLC-6 which has 6 connections

WS2812B 5050 built-in WS2811 Individual Addressable Full Color RGB Led Chip

Features and Benefits

The control circuit and the LED share the only power source.
Control circuit and RGB chip are integrated in a package of 5050 components, form a complete control of pixel point.
Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate.
Built-in electric reset circuit and power lost reset circuit.
Each pixel of the three primary color can achieve 256 brightness
display, completed 16777216 color full color display, and scan frequency
not less than 400Hz/s.
Cascading port transmission signal by single line. Din to Dout
Any two point the distance upto 5m transmission signal.
Send data at speeds of 800Kbps.

General description
WS2812B
is a intelligent control LED light source that the control circuit and
RGB chip are integrated in a package of 5050 components. Includes intelligent digital port data latch and signal reshaping amplification drive circuit.
Also includes a precision internal oscillator and
a programmable constant current control part, effectively
ensuring the pixel point light color height consistent. The data
transfer protocol use single NZR communication mode.
After the pixel
power-on reset, the Din port receive data from controller, the first
pixel collect initial 24bit data then sent to the internal data latch,
the other data which reshaping by the internal signal reshaping
amplification
circuit sent to the next cascade pixel through the Dout
port.
After transmission for each pixel,the signal to reduce 24bit.
pixel adopt auto reshaping transmit technology, making the pixel
cascade number is not limited the signal transmission, only depend on
the speed of signal transmission. LED
with low driving voltage,
environmental protection and energy saving, high brightness, scattering
angle is large, good consistency, low power, long life and other
advantages. The control chip integrated in LED above becoming a more
simple circuit, small volume, convenient installation.

Specification:


Model: 5050RGB WS2812B

Input voltage: DC5V

Wave length(NM):R-650mcd, G-520mcd,B-460mcd

Power::0.24W/PC

Signal: WS2811 chip

View angle:120 degree

Life span:no less than 50000hrs

For more information, see the datasheet: View Datasheet

Each LED will be FULLY tested prior to despatching your order. We will not accept that they have arrived damaged or non-functioning. Please read the data sheet for correct operation.

 

Please read and note the following before ordering:
1) My Shipping is for UK Mainland ONLY. No Scotish Highland, Northern Ireland, Isle of Wight or other Isles. Some areas may incur additional costs, if you are unsure please contact me prior to ordering.
2) Please ensure you have a valid contact phone number, I may pass this number onto the Carrier for delivery. No refund for carriage cost will be offered, if delivery is delayed as a result of no valid contact number being provided.
3) I welcome collection for orders,please select collection on checkout otherwise your order will be despatched. Once your order has been picked and tested if applicable. We will then inform you of a date and time for collection. Please bring your payment card for verification when collecting your order. No order will be released without card verification.
4) I am unable to provide ANY technical support, please ensure you fully understand how this item works by checking for any datasheets (not provided with the item), to enable the product to be used within your application / project.
5) VERY IMPORTANT >> Do not make ANY permanent connections. Please test the item BEFORE making any permanent connections e.g. soldering to the item. Please ensure you have the means to test the item WITHOUT applying ANY solder to the item. If an item has any solder applied I will NOT accept any return.
6) When upgrading to 1st class post, (if the option is available), please note this is sent via Royal Mail and is not a guaranteed next day service. If you need a 48hr courier service please select courier delivery. No weekend or public bank holiday deliveries.
7) We attempt to send out all orders received before 12.00pm. This excludes weekends and public holidays.
8) Customers placing multiple orders. – I may ship all the orders as one, please do not ask for a refund of shipping cost after you have placed your orders. Please do not place your orders if you want a refund of shipping cost.
9) Some items may have a "Warranty Void if removed" sticker, please DO NOT tamper or remove these stickers. I will not accept any rertuns with tampered or removed sticker. Some buyers have tried to send back items that I have not supplied.

**** Important note **** Some sellers claim the stock is in the UK, please be careful, the seller is often in China and sends the item to a UK agent who then forwards the item on with a UK stamp. Check where the seller is located not just the item location. All my items are physically with me, here in the UK and I offer a quick delivery and communication within the UK.

During busy periods there maybe a delay in delivering your package by Royal Mail. I apologies in adavnce for any inconvenience but would like to point this out before you place your order.