Timer Switch Controller Module 10sec to 24hr Steady Adjustable Delay Module
UK STOCK, UK SELLER
Specification
Function description
1. Power-on will reset the timer automatically;
2. The delay timer can be adjustmented from approximately 10 seconds to 24 hours.
3. Current output is based upon the input voltage: 3.3V/300mA; 5V/200mA; 9V/100mA
4. Input voltage:3.3-18V
5. Function:delay switch,timer,timer light etc.
Pin Assignment
V+ = Vcc
V- = GND
IN = Trigger inout
OUT = Output
Upon the trigger pin going Low momentarily, this will start the timer and the output will go high to approx. Vcc. Level.
When the timer has finished, the output will go LOW, even if the trigger pin remains LOW.
Once the timer has started further trigger inputs are ignored
Setting the Timer:
There is a small solder pad on the back of the PCB Marked ‘M’, when this solder pad is left open (unsoldered as supplied), use the following
switch setting to obtain these times
0 = Switch OFF 1 = Switch ON
00000:10 seconds 01000:4 minutes 10000:14 minutes 11000:30 minutes
00001:20 seconds 01001:5 minutes 10001:16 minutes 11001:35 minutes
00010:30 seconds 01010:6 minutes 10010:18 minutes 11010:40 minutes
00011:60 seconds 01011:7 minutes 10011:20 minutes 11011:45 minutes
00100:90 seconds 01100:8 minutes 10100:22 minutes 11100:50 minutes
00101:120 seconds 01101:9 minutes 10101:24 minutes 11101:55 minutes
00110:150 seconds 01110:10 minutes 10110:26 minutes 11110:60 minutes
00111:180 seconds 01111:12 minutes 10111:28 minutes 11111:75 minutes
There is a small solder pad on the back of the
PCB Marked ‘M’, when this solder pad is closed (soldered), use the
following
switch setting to obtain these times
0 = Switch OFF 1 = Switch ON
00000:1.5 hours 01000:5.5 hours 10000:9.5 hours 11000:17 hours
00001:2.0 hours 01001:6.0 hours 10001:10 hours 11001:18 hours
00010:2.5 hours 01010:6.5 hours 10010:11 hours 11010:19 hours
00011:3.0 hours 01011:7.0 hours 10011:12 hours 11011:20 hours
00100:3.5 hours 01100:7.5 hours 10100:13 hours 11100:21 hours
00101:4.0 hours 01101:8.0 hours 10101:14 hours 11101:22 hours
00110:4.5 hours 01110:8.5 hours 10110:15 hours 11110:23 hours
00111:5.0 hours 01111:9.0 hours 10111:16 hours 11111:24 hours
Important Note Before you decide to Buy: This item is provided with NO instructions or data sheets. We are unable to provide any technical support, it is therefore essential that you have the resources available to make use of this item and how it operates within the electrical specifications. We check and test each item, we are therefore unable to accept any returns based on a faulty module.
This item will be fully tested prior to despatch. Buy with confidence.
Please read and note the following before ordering:
1) My Shipping is for UK Mainland ONLY. No Scotish Highland, Northern Ireland, Isle of Wight or other Isles. Some areas may incur additional costs, if you are unsure please contact me prior to ordering.
2) Please ensure you have a valid contact phone number, I may pass this number onto the Carrier for delivery. No refund for carriage cost will be offered, if delivery is delayed as a result of no valid contact number being provided.
3) I welcome collection for orders,please select collection on checkout otherwise your order will be despatched. Once your order has been picked and tested if applicable. We will then inform you of a date and time for collection. Please bring your payment card for verification when collecting your order. No order will be released without card verification.
4) I am unable to provide ANY technical support, please ensure you fully understand how this item works by checking for any datasheets (not provided with the item), to enable the product to be used within your application / project.
5) VERY IMPORTANT >> Do not make ANY permanent connections. Please test the item BEFORE making any permanent connections e.g. soldering to the item. Please ensure you have the means to test the item WITHOUT applying ANY solder to the item. If an item has any solder applied I will NOT accept any return.
6) When upgrading to 1st class post, (if the option is available), please note this is sent via Royal Mail and is not a guaranteed next day service. If you need a 48hr service please select 48hr delivery at extra cost. This will be sent via Royal Mail or courier. I do not offer a 24hr service. No weekend or public bank holiday deliveries.
7) We attempt to send out all orders received before 10.00am. This excludes weekends and public holidays.
8) Customers placing multiple orders. – I may ship all the orders as one, please do not ask for a refund of shipping cost after you have placed your orders. Please do not place your orders if you want a refund of shipping cost.
9) Some items may have a “Warranty Void if removed” sticker, please DO NOT tamper or remove these stickers. I will not accept any rertuns with tampered or removed sticker. Some buyers have tried to send back items that I have not supplied.
**** Important note **** Some sellers claim the stock is in the UK, please be careful, the seller is often in China and sends the item to a UK agent who then forwards the item on with a UK stamp. Check where the seller is located not just the item location. All my items are physically with me, here in the UK and I offer a quick delivery and communication within the UK.
During busy periods there maybe a delay in delivering your package by Royal Mail. I apologies in adavnce for any inconvenience but would like to point this out before you place your order.
