433MHz DC12V 10A 1Channel Wireless Relay RF Remote Control Switch Receiver NEW
Specification
Specification:
Model:KR1201A
Name:Wireless Relay
1.Input Voltage: DC10-14V
2.Standby Current: <5MA
3.RF Frequency: 433MHZ
4.RF Working mode:Super heterodyne receiver
5.Receiver Sensitivity: >90dBm
6.Remote Control Distance: >100 meter(In open environment)
7.Decoding Way: MCU Software decoding
8.Can store the number of remote control:50
9.Support remote control type: Fixed code, learning code
10.Channel: 1CH
11.Multiple working modes: (Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched,Delay off)
12.Wiring Method:Fixed wiring terminal
13.Working Voltage: DC12V
14.Output Current: 10A
15.Rated load:10A 250VAC / 10A 125VAC
10A 30VDC / 10A 28VDC
16.Output:Normally open,Common,Normally closed
17.Dimension:3.5cm*3cm*1.6cm
Working/output way:
1.Jog/Non-Latched: Press one button is Working /ON. Loosen your finger
on the same button is Stop/OFF. One channel switch need one buttons
remote control.
2.Self -lock/Self-Latched: Press one button for one
time is working/ON. Press the same button again is stop/OFF. One channel
switch need one buttons remote control.
3.Inter-lock /Latched:
Press one button is working/ON, press another button is stop/OFF. One
channel switch need 2 buttons remote control.
4.Delay: Press remote
control ‘s one button,relay is working,release the remote control and
begin timekeeping,after 5s/10s/15s will automatically close the relay
Learn:
1. press the learning code .the indicator flash ,loosen your finger
,press any button of the remote control (press 1 times to learn
Momentary;2times-Toggle;3times-Latched;4times-5s delay;5times-10s
delay;6times-15s delay)
the indicator flash 2 times and off .it mean you learn it successfully .
Important Note Before you decide to Buy: This item is provided with NO instructions or data sheets. We are unable to provide any technical support, it is therefore essential that you have the resources available to make use of this item and how it operates within the electrical specifications. We check and test each item, we are therefore unable to accept any returns based on a faulty module.
This item will be fully tested prior to despatch. Buy with confidence.
**** Important note **** Some sellers claim the stock is in the UK, please be careful, the seller is often in China and sends the item to a UK agent who then forwards the item on with a UK stamp. Check where the seller is located not just the item location. All my items are physically with me, here in the UK and I offer a quick delivery and communication within the UK.
During busy periods there maybe a delay in delivering your package by Royal Mail. I apologies in adavnce for any inconvenience but would like to point this out before you place your order.