Buyhere22, 26 Somers Road, Rugby, CV22 7DH

Thermostat Temperature Digital Controller Intelligent Regulator with Senor DC12V

£10.11

2 in stock

DC12V Intelligent Digital Thermostat Temperature Controller Regulator with NTC Senor

  

UK STOCK, UK SELLER


   

 
Specification
 Temperature range: -9 to 99 centigrade 

  • Accuracy: 1 centigrade 
  • Control accuracy: 1 centigrade 
  • Setting Range: -9 to 99 centigrade 
  • Refresh rate: 1S
  • Input Power: DC12V
  • Output: relay output, capacity 220V 10A / 12V 10A
  • Environmental requirements: -10-60 centigrade 
  • Humidity: 20% -85%
  • Size: 78x51mm
  • Temperature sensor: NTC(3950-10k 1%)
  • Sensor cable length approx. 30cm

 

Red LED Indicator:
  • START (red) indicator light, which means that the relay is energised and the relay output contacts are closed.
 
Green LED light:
  • Stop (green) light is on, which means that the relay is de-energised and the relay output contacts are open.
Digital Display Indicators
  • Middle
    Indicator displays the current detected temperature, the left display shows the start temperature, the right display shows the stop temperature.
  
Operating Instructions
 
1 High temperature start:
 
  • Set the starting temperature value > stop temperature value
  • When the detected temperature ≥ start temperature, the relay is energised
  • When the detected temperature ≤ stop temperature, the relay is de-energised
  • For example: Set the starting temperature is 30 centigrade , stop temperature is 25 centigrade
  • When the detected temperature ≥ 30 centigrade , the relay is energised, the start led (red) illuminates
  • When the detected temperature value ≤ 25 centigrade  the relay is de-energised, stop led (green) illuminates
     
 2 Low temperature start:
  • Set the starting temperature value < stop temperature value
  • When the detected temperature ≤ start temperature relay is energised
  • When the detected temperature ≥ stop temperature, the relay is de-energised
  • For example: Set the starting temperature is 25 centigrade , stop temperature is 30 centigrade ,
  • When the detected temperature value ≤ 25 centigrade , the relay is energised, the start led (red) illuminates
  • When the detected temperature ≥ 30 centigrade , the relay is de-energised, stop led (green) illuminates


Important Note Before you decide to Buy: This item is provided with NO instructions or data sheets. We are unable to provide any technical support, it is therefore essential that you have the resources available to make use of this item and how it operates within the electrical specifications. We check and test each item, we are therefore unable to accept any returns based on a faulty module.

This item will be fully tested prior to despatch. Buy with confidence. 

 

Please read and note the following before ordering:
1) My Shipping is for UK Mainland ONLY. No Scotish Highland, Northern Ireland, Isle of Wight or other Isles. Some areas may incur additional costs, if you are unsure please contact me prior to ordering.
2) Please ensure you have a valid contact phone number, I may pass this number onto the Carrier for delivery. No refund for carriage cost will be offered, if delivery is delayed as a result of no valid contact number being provided.
3) I welcome collection for orders,please select collection on checkout otherwise your order will be despatched. Once your order has been picked and tested if applicable. We will then inform you of a date and time for collection. Please bring your payment card for verification when collecting your order. No order will be released without card verification.
4) I am unable to provide ANY technical support, please ensure you fully understand how this item works by checking for any datasheets (not provided with the item), to enable the product to be used within your application / project.
5) VERY IMPORTANT >> Do not make ANY permanent connections. Please test the item BEFORE making any permanent connections e.g. soldering to the item. Please ensure you have the means to test the item WITHOUT applying ANY solder to the item. If an item has any solder applied I will NOT accept any return.
6) When upgrading to 1st class post, (if the option is available), please note this is sent via Royal Mail and is not a guaranteed next day service. If you need a 48hr courier service please select courier delivery. No weekend or public bank holiday deliveries.
7) We attempt to send out all orders received before 12.00pm. This excludes weekends and public holidays.
8) Customers placing multiple orders. – I may ship all the orders as one, please do not ask for a refund of shipping cost after you have placed your orders. Please do not place your orders if you want a refund of shipping cost.
9) Some items may have a "Warranty Void if removed" sticker, please DO NOT tamper or remove these stickers. I will not accept any rertuns with tampered or removed sticker. Some buyers have tried to send back items that I have not supplied.

**** Important note **** Some sellers claim the stock is in the UK, please be careful, the seller is often in China and sends the item to a UK agent who then forwards the item on with a UK stamp. Check where the seller is located not just the item location. All my items are physically with me, here in the UK and I offer a quick delivery and communication within the UK.

During busy periods there maybe a delay in delivering your package by Royal Mail. I apologies in adavnce for any inconvenience but would like to point this out before you place your order.  

Contact Us.

Returns

Privacy Policy

Cookie Policy

Terms and Conditions

Buyhere22, 26 Somers Road, Rugby, CV22 7DH