Step Up Voltage Converter XL6009 DC-DC 3-32v input 5-35v output
The XL6009 regulator is a wide input range DC to DC step-up converter. The high quality components provide a conversion efficiency of up to 94%.
IN- Input Negative
IN + input Positive
Out – Output Negative
Out + Output Positive
Test comparison sample reference:
Input 3V Output 12V 0.4A 4.8W
Input 5V Output 12V 0.8A 9.6W
Input 7.4V Output 12V 1.5A 18W
Input 12V Output 15V 2A 30W
Input 12V Output 16V 2A 32W
Input 12V Output 18V 1.6A 28.8W
Input 12V Output 19V 1.5A 28.5W
Input 12V Output 24V 1 A 24W
Vin * Iin * Efficiency = Vout * Iout
Vin: Input Voltage
Iin: input current
Vout: Output Voltage
Iout: output current
DSN6009 4A is a high-performance step-up switching current (BOOST) module.
The module uses the second generation of high-frequency switching technology XL6009E1 core chip performance compared to the first generation technology of the LM2577.
XL6009 boost module at a lower cost, superior performance, Remember the LM2577 module is about to become obsolete.
● Wide input voltage 3V ~ 32V, optimum operating voltage range is 5 ~ 32V;
● Wide Output voltage 5V ~ 35V;
● Built-4A efficient MOSFET switches enable efficiency up to 94%; (LM2577 current is only 3A)
● high switching frequency 400KHz, can use a small-capacity filter capacitors that can achieve very good results, the ripple smaller and smaller. (LM2577 frequency only 50KHz)
DSN6009 boost module
Module Properties Non-isolated boost (BOOST)
Rectification Non-Synchronous Rectification
Input Range 3V ~ 32V
Output Range 5V ~ 35V
Input Current 4A (max), no-load 18mA (5V input, 8V output, no-load is less than 18mA. Higher the voltage, the greater the load current.)
Conversion efficiency <94% (greater the pressure, the lower the efficiency)
Switching frequency 400KHz
Output Ripple 50mV (the higher the voltage, the greater the current, the greater the ripple)
Load Regulation ± 0.5%
Voltage Regulation ± 0.5%
Operating Temperature -40 ℃ ~ +85 ℃
Dimensions 43mm * 21mm * 14mm (L * W * H)
Check the full specification of the XL6009 Chip Download datasheet
We offer the following options for easy connection to your circuit:
The board is supplied without any connectors and you can add suitable connectors to the provided input and output pads.
With headers – loose
4 loose SIL header pins will be included with the board. These pins can be soldered to the input and output pads.
With headers – soldered facing down
SIL header pins will be soldered facing downwards – away from the components on the board. This is ideal for plugging the regulator into existing boards or into a breadboard.
With headers – soldered facing upwards
SIL header pins will be soldered facing upwards – the same side as the other components on the board from the components on the board. This is ideal for use with fly leads to connect the regulator to the rest of your circuit.
**** Important note **** Some sellers claim the stock is in the UK, please be careful, the seller is often in China and sends the item to a UK agent who then forwards the item on with a UK stamp. Check where the seller is located not just the item location. All my items are physically with me, here in the UK and I offer a quick delivery and communication within the UK.
During busy periods there maybe a delay in delivering your package by Royal Mail. I apologies in adavnce for any inconvenience but would like to point this out before you place your order.