ATMEGA8 ATMEGA48 ATMEGA88 Development Board AVR (NO Chip) DIY Kit
£6.43 – £11.03
Supply voltage: This can be provided via the USB socket or via the pins. THE SUPPLY VOLTAGE AND THE OPERATING VOLTAGE OF THE CHIP MUST BE THE SAME
PCB board size: 7.4cm x 3.4cm;
Note: This is a DIY kit, components are supplied loose for self assembly, you will need to solder the components yourself.
Placement of the components are marked on the PCB see below for capacitor placement.
Alternatively you can select the assembled option, we will then solder all the components for you.
- NO DOCUMENTATION IS SUPPLIED
PCB board x1
28pin Zif Socket x1
USB female x1
2x5pin connector x1
self-locking switch x1
40pin Sil Header x1
8MHz crystal x1
22pf (22) ceramic capacitors x2 (to be soldered adjacent to the crystal)
100nf (104) ceramic capacitors x2 (to be soldered adjacent to the 10k resistor and between PC0 and PB7)
3mm LED x2
Reset switch x1
4.7K resistor x2
10K resistor x1
All components will be double checked for quantity and value prior to shipping. (The colour of the components may differ)
Important Note Before you decide to Buy: This item is provided with NO instructions or data sheets. We are unable to provide any technical support,
it is therefore essential that you have the resources available to make
use of this item and how it operates within the electrical
specifications. We check and test each item, we are therefore unable to
accept any returns based on a faulty module.
This item will be fully tested prior to despatch. Buy with confidence.
**** Important note **** Some sellers claim the stock is in the UK, please be careful, the seller is often in China and sends the item to a UK agent who then forwards the item on with a UK stamp. Check where the seller is located not just the item location. All my items are physically with me, here in the UK and I offer a quick delivery and communication within the UK.
During busy periods there maybe a delay in delivering your package by Royal Mail. I apologies in adavnce for any inconvenience but would like to point this out before you place your order.