Buyhere22, 26 Somers Road, Rugby, CV22 7DH

Wago Connectors Cable 221 Series 221-412 221-413 221-415 New Style Stockist

£2.75£51.51


WAGO Transparent Connectors 221-412

221-413 221-415

New from WAGO

We are an Authorised Wago Stockist

Suitable for a wide range of Cables 0.14 to 4 mm² (AWG 24-12) for stranded wires and from 0.2 to 4 mm² (AWG 24-12) for solid and fine stranded wires.

Proven and perfected: WAGO’s 221 Series COMPACT Splicing Connectors
for all wire types set new standards. This new series is 40 % smaller
and even more user-friendly than its successful predecessor, the 222
Series.

WAGO’s new “superstars” for electrical installations
allow solid, stranded and fine-stranded wires to be connected faster,
more reliably, while minimizing the amount of space in junction boxes:
This is not just made possible by their compact design, which is 40 %
smaller than the well-established 222 Series, but also by their
transparent housing, easier handling and two test ports.

The new WAGO 221 Compact Connector. QUICK AND EASY, A MUST HAVE TO SAVE TIME !

  • Up to 40 % smaller less space required than for the original WAGO 222
  • Transparent housing for visual inspection shows that the wire is inserted properly and stripped to the correct length
  • Easy termination via reduced operating force
  • Any combination of wire types and sizes from 0.14 to 4 mm² (AWG 24-12) for stranded wires and from 0.2 to 4 mm² (AWG 24-12) for solid and fine stranded wires.

WAGO’s COMPACT splicing connectors make installation much easier

Due
to their extremely small dimensions, WAGO’s 221 Series Connectors are
ideal for space-restricted applications. Installation is made much
easier, while providing additional freedom for future expansions.

The
transparent housing is another highlight: Now, you can clearly see if
the wires are connected properly and stripped to the correct length.
Furthermore, two easily accessible test ports, one in the wire entry
direction and one opposite this, provide easy test conditions, even when
installed.

WAGO’s new splicing connectors are also easier to
use: The operating levers can now be opened and closed using noticeably
less force. Lateral hollowed-out grips provide a firm hold on the 221
Series connectors in any situation.

One splicing connector for all wire types

The
2, 3 and 5 wire connectors accommodate stranded wires from 0.14 to 4
mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12
AWG). They are therefore ideally suited to connect different wire sizes
and types to each other. Tinned current bars ensure a permanent,
gas-tight and secure wire connection.

Ratings up to 32 A/450 V
and 105 °C maximum continuous operating temperature allow the 221 Series
Splicing Connectors to be used at ambient temperatures up to 85 °C
(T85), making them ideal for small and large loads. Furthermore,
approvals like ENEC or UL allow them to be used in worldwide
applications.

Suitable for all wires types

Quickly and easily connect all types of wires of different sizes with this small splicing connector up to 4 mm2 (12 AWG).

The 2-, 3- and 5-wire connectors accommodate fine-stranded wires from 0.14 to 4 mm2 (24–12 AWG), as well as solid and stranded wires from 0.2 to 4 mm2
(24–12 AWG). This wide range allows you to connect different types of
wires and enables bridging of wires with greatly differing cross
sections

For more information, please see the .

 

221-412 221-413 221-415
Electrical data Electrical data Electrical data
Ratings per IEC/EN 60664-1 Ratings per IEC/EN 60664-1 Ratings per IEC/EN 60664-1
Rated
voltage (II / 2)
450 V Rated voltage (II / 2) 450 V Rated voltage (II / 2) 450 V
Rated
impulse voltage (II / 2)
4 kV Rated impulse voltage (II / 2) 4 kV Rated impulse voltage (II / 2) 4 kV
Rated
current
32 A Rated current 32 A Rated current 32 A
Legend
(ratings)
(II / 2) ≙ Overvoltage category
II / Pollution degree 2
Legend (ratings) (II / 2) ≙ Overvoltage category
II / Pollution degree 2
Legend (ratings) (II / 2) ≙ Overvoltage category
II / Pollution degree 2
Connection data Connection data Connection data
Connection
technology
CAGE CLAMP® Connection technology CAGE CLAMP® Connection technology CAGE CLAMP®
Actuation
type
Lever Actuation type Lever Actuation type Lever
Connectable
conductor materials
Copper Connectable conductor materials Copper Connectable conductor materials Copper
Nominal
cross section
4 mm² Nominal cross section 4 mm² Nominal cross section 4 mm²
Solid
conductor
0.2 … 4 mm² / 24 … 12 AWG Solid conductor 0.2 … 4 mm² / 24 … 12 AWG Solid conductor 0.2 … 4 mm² / 24 … 12 AWG
Stranded
conductor
0.2 … 4 mm² / 24 … 12 AWG Stranded conductor 0.2 … 4 mm² / 24 … 12 AWG Stranded conductor 0.2 … 4 mm² / 24 … 12 AWG
Fine-stranded
conductor
0.14 … 4 mm² / 24 … 12 AWG Fine-stranded conductor 0.14 … 4 mm² / 24 … 12 AWG Fine-stranded conductor 0.14 … 4 mm² / 24 … 12 AWG
Strip
length
11 mm / 0.43 Inch Strip length 11 mm / 0.43 Inch Strip length 11 mm / 0.43 Inch
Total
number of connection points
2 Total number of connection
points
3 Total number of connection
points
5
Total
number of potentials
1 Total number of potentials 1 Total number of potentials 1
Type of
wiring
Side-entry wiring Type of wiring Side-entry wiring Type of wiring Side-entry wiring
More More More
Geometrical Data Geometrical Data Geometrical Data
Width 13.1 mm / 0.516 inch Width 18.7 mm / 0.736 inch Width 29.9 mm / 1.177 inch
Height 8.3 mm / 0.327 inch Height 8.3 mm / 0.327 inch Height 8.3 mm / 0.327 inch
Depth 18.6 mm / 0.732 inch Depth 18.6 mm / 0.732 inch Depth 18.6 mm / 0.732 inch
Material Data Material Data Material Data
Color transparent Color transparent Color transparent
Flammability
class per UL94
V2 Flammability class per UL94 V2 Flammability class per UL94 V2
Fire
load
0.026 MJ Fire load 0.036 MJ Fire load 0.074 MJ
Weight 1.6 g Weight 2.527 g Weight 4.048 g
Environmental Requirements Environmental Requirements Environmental
Requirements
Surrounding
air (operating) temperature
85 °C Surrounding air (operating)
temperature
85 °C Surrounding air (operating)
temperature
85 °C
Continuous
operating temperature up to
105 °C Continuous operating temperature
up to
105 °C Continuous operating temperature
up to
105 °C
T-Marking
per EN 60998
T85 T-Marking per EN 60998 T85 T-Marking per EN 60998 T85

Product will be supplied loose not in a box
Remember we are an AUTHORISED WAGO STOCKIST

 

Pictures and text obtained with permission from Wago

Please read and note the following before ordering:
1) My Shipping is for UK Mainland ONLY. No Scotish Highland, Northern Ireland, Isle of Wight or other Isles. Some areas may incur additional costs, if you are unsure please contact me prior to ordering.
2) Please ensure you have a valid contact phone number, I may pass this number onto the Carrier for delivery. No refund for carriage cost will be offered, if delivery is delayed as a result of no valid contact number being provided.
3) I welcome collection for orders,please select collection on checkout otherwise your order will be despatched. Once your order has been picked and tested if applicable. We will then inform you of a date and time for collection. Please bring your payment card for verification when collecting your order. No order will be released without card verification.
4) I am unable to provide ANY technical support, please ensure you fully understand how this item works by checking for any datasheets (not provided with the item), to enable the product to be used within your application / project.
5) VERY IMPORTANT >> Do not make ANY permanent connections. Please test the item BEFORE making any permanent connections e.g. soldering to the item. Please ensure you have the means to test the item WITHOUT applying ANY solder to the item. If an item has any solder applied I will NOT accept any return.
6) When upgrading to 1st class post, (if the option is available), please note this is sent via Royal Mail and is not a guaranteed next day service. If you need a 48hr service please select 48hr delivery at extra cost. This will be sent via Royal Mail or courier. I do not offer a 24hr service. No weekend or public bank holiday deliveries.
7) We attempt to send out all orders received before 10.00am. This excludes weekends and public holidays.
8) Customers placing multiple orders. – I may ship all the orders as one, please do not ask for a refund of shipping cost after you have placed your orders. Please do not place your orders if you want a refund of shipping cost.
9) Some items may have a “Warranty Void if removed” sticker, please DO NOT tamper or remove these stickers. I will not accept any rertuns with tampered or removed sticker. Some buyers have tried to send back items that I have not supplied.

**** Important note **** Some sellers claim the stock is in the UK, please be careful, the seller is often in China and sends the item to a UK agent who then forwards the item on with a UK stamp. Check where the seller is located not just the item location. All my items are physically with me, here in the UK and I offer a quick delivery and communication within the UK.

During busy periods there maybe a delay in delivering your package by Royal Mail. I apologies in adavnce for any inconvenience but would like to point this out before you place your order.