Lithium Battery Charger Module 5A Step down Constant Supply Module LED Driver

£6.43

9 in stock

UK Seller UK Stock – Fast Delivery

This is a very versatile power module. Constant Current

Specifications

1.Input voltage range:6～38VDC(Note:input voltage MUST not exceed 38V)

2. Output voltage range:1.25-36VDC adjustable

3.Output current: 0-5A

4.Output power: 75W

5.High efficiency up to 96%

6.Built in thermal shutdown function

7.Built in current limit function

8.Built in output short protection function

9.Input reverse polarity protection: None (if required, high current diode in series with the input).

10. L x W x H =61.7*26.2*15mm

11.Weight: 20g

Application

1.Use as a step-down modules with overcurrent protection capabilities

Usage:

(1) adjust the “voltage potentiometer” so that the output voltage reaches the value you want.

(2)
use a multimeter to measure the output short-circuit current with 10A
stalls, while regulating the “current potentiometer” so that the output
current reaches a predetermined overcurrent protection value. (For
example, the meter displays the current value of 4A, then you can use
the module to a maximum current of 4A)

(3) Connected to the load.

2.Use as a battery charger

Usage:

(1)   Make
sure you need to charge the battery float voltage and charging current;
(if lithium parameters 3.7V/2200mAh, then the float voltage is 4.2V,
the maximum charging current 1C, ie 2200mA)

(2)   Under
no-load conditions, adjust the “Voltage potentiometer” so that the
output voltage reaches the float voltage; (if to 3.7V rechargeable
lithium battery, the output voltage can be adjusted to 4.2V)

(3)   use
a multimeter to measure the output short-circuit current with 10A
stalls, while regulating the “current potentiometer” so that the output
current reaches a predetermined Charging current value.

(4)   Charge
turn lamp current factory default is 0.1 times the charging current;
(Battery during charging current is gradually reduced, if the charge
current setting is 1A, then when the charge current is less than 0.1A,
blue lights turned off, the green light is on, which means that the
battery is fully   charged)

(5)   connected to the battery charge.

(1,2,3,4 steps as: Output is unloaded, do not connect the battery)

3.Use as a LED constant current driver module

Usage:

(1)   adjust the “voltage potentiometer” so that the output voltage reaches the value you want.

(2)   use
a multimeter to measure the output short-circuit current with 10A
stalls, while regulating the “current potentiometer” so that the output
current reaches a predetermined LED operating current.

(3)   Connect LED, work.

(in steps 1,2 do not connect LED)

Important
Note Before you decide to Buy: This Module is provided with NO
instructions or data sheets. We are unable to provide any technical
support, it is therefore essential that you have the resources available
to make use of the modules and how they operate within their electrical
specifications.

We check and test each module, we are therefore unable
to accept any returns based on a faulty module.

Please read and note the following before ordering:

1) My Shipping is for UK Mainland ONLY. No Scotish Highland, Northern Ireland, Isle of Wight or other Isles. Some areas may incur additional costs, if you are unsure please contact me prior to ordering.

2) Please ensure you have a valid contact phone number, I may pass this number onto the Carrier for delivery. No refund for carriage cost will be offered, if delivery is delayed as a result of no valid contact number being provided.

3) I welcome collection for orders,please select collection on checkout otherwise your order will be despatched. Once your order has been picked and tested if applicable. We will then inform you of a date and time for collection. Please bring your payment card for verification when collecting your order. No order will be released without card verification.

4) I am unable to provide ANY technical support, please ensure you fully understand how this item works by checking for any datasheets (not provided with the item), to enable the product to be used within your application / project.

5) VERY IMPORTANT >> Do not make ANY permanent connections. Please test the item BEFORE making any permanent connections e.g. soldering to the item. Please ensure you have the means to test the item WITHOUT applying ANY solder to the item. If an item has any solder applied I will NOT accept any return.

6) When upgrading to 1st class post, (if the option is available), please note this is sent via Royal Mail and is not a guaranteed next day service. If you need a 48hr courier service please select courier delivery. No weekend or public bank holiday deliveries.

7) We attempt to send out all orders received before 12.00pm. This excludes weekends and public holidays.

8) Customers placing multiple orders. – I may ship all the orders as one, please do not ask for a refund of shipping cost after you have placed your orders. Please do not place your orders if you want a refund of shipping cost.

9) Some items may have a "Warranty Void if removed" sticker, please DO NOT tamper or remove these stickers. I will not accept any rertuns with tampered or removed sticker. Some buyers have tried to send back items that I have not supplied.

**** Important note **** Some sellers claim the stock is in the UK, please be careful, the seller is often in China and sends the item to a UK agent who then forwards the item on with a UK stamp. Check where the seller is located not just the item location. All my items are physically with me, here in the UK and I offer a quick delivery and communication within the UK.

During busy periods there maybe a delay in delivering your package by Royal Mail. I apologies in adavnce for any inconvenience but would like to point this out before you place your order.

Contact Us.

Returns

Privacy Policy

Cookie Policy

Terms and Conditions

Buyhere22, 26 Somers Road, Rugby, CV22 7DH